Energy metering and analysis

We work from measured data, not from brochures.

Before you spend anything on new equipment, we look at what the real consumption data of your buildings show. If there is no meaningful saving to be made, we tell you so in writing, with the reasons.

The first consultation is free. Independent engineering advice for municipalities, public institutions and companies, with no ties to any manufacturer or reseller.

Daily load curve of a school 15-minute data · illustration
050100150kW 0:006:0012:0018:0024:00 Contracted capacity Short peak Night-time base load while closed
Measured load Unjustified consumption Contracted capacity
Why it matters

Everyone pays the bill. Few analyse what lies behind it.

Town halls, schools, kindergartens, sports halls, offices and plants: energy is a large cost that returns every year. Waste typically hides in three places.

Load profile

When, in which building and at what power is energy used, and is it justified? A typical example is weekend or night-time base consumption in a closed building.

Reactive energy

Reactive energy above the contractual limit is billed separately. This item often goes unnoticed for years, although it can be measured and dealt with.

Peak load and contracted capacity

A few short, unmanaged peaks can push up the capacity you need to contract. Oversized contracted capacity costs money even when it is not used.

Our aim is not to sell equipment but to uncover waste, before any money is spent on investment.

How we work

The first step: free data analysis and a personal consultation

We do not arrive at the first meeting with a template quote. We sit down with your technical and financial managers and start from the data you already have.

  1. Data collection

    You share the 15-minute load data (available from the distribution system operator), the last 12 months of invoices and the current electricity contract.

  2. Analysis

    Using our own analysis tools and engineering experience, we examine the load curves and the main consumers. Results are ready within 2–3 working days of receiving the data.

  3. Consultation

    We go through the results with your technical managers, because they know best how the buildings are used.

  4. An open decision

    Together we decide whether detailed on-site metering, and after that any investment, is worthwhile.

If the numbers show no meaningful potential for improvement, we say so honestly. No money spent for nothing.

The critical point

When does your electricity contract expire?

Without an accurate consumption profile a few months before expiry, procurement is based on estimates: of volume, contracted capacity and profile alike. Bidders price in that uncertainty.

Metering gives a solid basis for your next procurement, whether a public tender or a comparison of market offers.

What metering brings to procurement

  • real, building-level consumption and power data for the tender documents;
  • justified contracted capacity, neither oversized nor undersized;
  • a comparable baseline for evaluating incoming offers.
I want to prepare in time
Services

Three services, one common basis: measured data

On-site power metering and load profile analysis

The question it answers
Where, when and why is more energy used than necessary?
What you get
A metering report per building, the losses found and a ranked list of recommended measures.

Contract timing and procurement preparation

The question it answers
When and with what parameters should the next procurement start?
What you get
A consumption profile and technical data set for the tender documents, plus support in evaluating offers.

Real payback calculation for renewables

The question it answers
Does a solar PV system or battery storage pay back, and at what size?
What you get
A manufacturer-independent system proposal sized to the measured load, with a payback calculation.

Payback calculations are based solely on measured data. We do not size the largest possible system, but the one that fits the building's real consumption.

Who we work for

Public institutions and companies

Municipalities and institutions

  • Town halls, schools, kindergartens, sports halls, street lighting
  • Consumption picture per institution for budget planning
  • Technical data for electricity public procurement
  • Justified investment decisions based on measured data, without risking public money

Companies and industrial plants

  • Analysis of load profile, peaks and reactive energy per site
  • Optimising contracted capacity and the energy contract
  • Sizing solar PV and battery storage to the measured load
  • Operational reliability: design of uninterruptible power supply and consumption monitoring
About us

Why Robo-brains Kft.?

01

A demanding engineering background

We have worked on defence and medical technology developments, where fault tolerance and reliability are not goals but basic requirements. We measure and calculate with the same discipline for a school, an office building or a plant.

02

Independence

We are not agents of any manufacturer or reseller. We represent only our client's interests and measure our recommendations against them.

03

Real accountability

Straight answers and verifiable engineering calculations. Every recommendation comes with the measured data it is based on.

Roland Hermann

Managing Director · electrical engineer, energy efficiency

He attends the first meeting in person and presents the metering results to your technical and financial managers.

Frequently asked questions

What people usually ask before the first meeting

How much does the first consultation cost?

The first consultation is free of charge. We review your available consumption data, invoices and electricity supply contract, then decide together whether detailed on-site metering makes sense.

How long does the first analysis take?

2–3 working days from receiving the data. We then walk through the results in person with your technical and financial managers.

What data do you need for the first analysis?

15-minute load data, the last 12 months of electricity invoices, and the current supply contract with its expiry date. If anything is missing, we help you obtain it.

Where can 15-minute load data be obtained?

From the distribution system operator, which releases the load data of a metering point at the customer's request. We help with the request.

What is reactive energy and why do you pay for it?

Reactive energy is needed by motors, transformers and some lighting and electronic equipment but does no useful work. The part above the contractual limit is billed separately by the supplier. Metering shows where it comes from and whether compensation pays off.

When should we start preparing before our electricity contract expires?

At least a few months before the next procurement is planned to start, so that metering covers a representative period and the tender documents are based on a real consumption profile and a justified contracted capacity.

Is a solar PV system or battery storage worth installing?

We calculate this from the measured load curve. We recommend the size that matches the building's real consumption, and if the system does not pay back, we say so.

Are you tied to any manufacturer or reseller?

No. We are not agents of any manufacturer or reseller, so we represent only our client's interests.

Where do you work?

We are based in Csomád, Pest County, Hungary. We work in Budapest and Pest County, and elsewhere in Hungary by arrangement.

Contact

Suggested next step: a free 60–90 minute meeting

We review the data together with your technical and financial managers, and at the end we decide together whether on-site metering is justified.

If available, please bring:

  • any available 15-minute load data;
  • the last 12 months of electricity invoices;
  • the current supply contract and its expiry date.

Book a meeting

Tell us what you would like to know. We will get back to you on working days.